徠卡顯微鏡系統
雷射掃描共軛焦顯微鏡
半導體及工業用顯微鏡
顯微數位影像系統
細胞基因影像分析系統
其它光電微機電系統
其它生醫研究儀器
維修與技術支援服務
聯絡與留言

Leica  顯微鏡

物鏡表

Leica 的光學物鏡, 適用所有 Leica 產製的正立或倒立光學顯微鏡.
Achromatic Objective HI-PLAN 系列 FOV ( 視野數 ) 為 20
Plan-achromatic Objective N PLAN 系列 FOV ( 視野數 ) 為 22
Semi-Apochromatic Objective HC/X PL Fluotar 系列 FOV ( 視野數 ) 為 25
Apochromatic Objective HC/X PL-APO 系列 FOV ( 視野數 ) 為 25

   特殊物鏡, 共軛焦專用物鏡, TIRF 專用物鏡, STED 專用物鏡, 水鏡, 雷射光源應用物鏡, 請洽本公司業務人員
Objective type Magnification / NA Immersion Technique Cover-glass Interference contrast prisms Obj. thread Free working distance (mm) 訂購編號
ICT ICR
Upright 

Inverted-condenser
S 1 S 23 S 70 Obj.
HCX PL FLUOTAR 1.25/0.04 0 17) - - - - - - - M25 3.7 11506215
HCX PL FLUOTAR 1.25/0.04 0 17) 0 - - - - - - M25 2.0 11566045
PL FLUOTAR 1,6x/0.05 0 0 - - - - - - - M25 3.4 11506234
HCX PL FLUOTAR 1,6x/0.05 0 1) - - - - - - - M25 1.54 11566059
PL S-APO 1,6x/0.05 0 0 - - - - - - - M25 1.55 11506287
N PLAN 2,5x/0.07 0 0 - - - - - - - M25 11.2 11506083
N PLAN 2,5x/0.07 0 P - - - - - - - M25 11.2 11556036
FL PLAN 2,5x/0.07 0 0 - - - - - - - M25 11.3 11506304
PL FLUOTAR 2,5x/0.07 0 0 - - - - - - - RMS 9.2 11567010
HI PLAN 4x/0.10 0 0 - - - - - - - M25 18.0 11506226
HI PLAN 4x/0.10 0 SL - - - - - - - M25 18.0 11506227
HI PLAN 4x/0.10 0 POL - - - - - - - M25 18.0 11556060
HI PLAN EPI 5x/0.12 0 0 - - - - - - - M25 11.7 11566071
PLAN UVI 5x/0.12 0 LMD 12) - - - - - - - M25 11.7 11518146
N PLAN 5x/0.12 0 0 - K1b+B1 - K11 K3 B1 B1,B2 M25 14.0 11506302
N PLAN 5x/0.12 0 PH0/ 0 K1b+B1 - K11 K3 B1 B1,B2 M25 14.0 11506303
N PLAN EPI 5x/0.12 0 0 - K1b+B1 - K11 K3 B1 B1,B2 M25 14.0 11566076
N PLAN EPI 5x/0.12 0 BD - K1b+B1 - K11 K3 B1 B1,B2 M32 14.0 11566077
N PLAN EPI 5x/0.12 0 P - K1b+B1 - K11 K3 B1 B1,B2 M25 14.0 11556075
FL PLAN 5x/0.12 0 0 - K1b+B1 - K11 K3 B1 B1,B2 M25 14.1 11506305
K1a+D1 6)
HC PL FLUOTAR 5x/0.15 0 13) - or K1b+D1 - K11 K3 D1 D1(D) M25 12.0 11506504
17)
HCX PL FLUOTAR 5x/0.15 0 13) - K1b+C1 17) - K11 K3+C1 K2+C C1 C, C1, C2 M25 12.0 11506224
HCX PL FLUOTAR 5x/0.15 0 P - K1a+C1 6) or K1b+C1 17) - K11 K3 C1 C, C1, C2 M25 12.0 11556058
HCX PL FLUOTAR 5x/0.15 0 BD - - - - - - C, C1, C2 M32 12.2 11566046
PL S-APO 5x/0.15 0 13) - K1b+C1 17) - K11 K3+C1 K2+C C1 C, C1, C2 M25 12.1 11506288
UVI 6.3x/0.13 0 LMD 12) - - - - - - - M25 19.0 11518145
C PLAN 10x/0.22 0 0 - - - - - - - M25 7.8 11506075
C PLAN 10x/0.22 0 LMC - - - - - - - M25 7.8 11506138
HI PLAN EPI 10x/0.25 0 0 - - - - - - - M25 12.0 11566069
HI PLAN I 10x/0.22 0 0 - - - - - - - M25 7.8 11506263
HI PLAN I 10x/0.22 0 PH1/ 13) - - - - - - - M25 7.8 11506271
HI PLAN 10x/0.25 0 0 - - - - - - - M25 12.0 11506228
HI PLAN 10x/0.25 0 SL - - - - - - - M25 12.0 11506229
HI PLAN 10x/0.25 0 PH1 - - - - - - - M25 12.0 11506230
HI PLAN 10x/0.25 0 POL - - - - - - - M25 12.0 11556061
HI PLAN CY 10x/0.25 0 0 - - - - - - - M25 17.6 11506261
HI PLAN CY 10x/0.25 0 PH1 - - - - - - - M25 17.6 11506266
N PLAN 10x/0.25 0 0 0 K2+B1 K11+ B1 K3+B1 K11+B2 K6+B1 K3+B2 B1 B2 B1 B2 M25 17.6 11506259
N PLAN 10x/0.25 0 PH1/ 3) - K2+B1 K11+ B1 K3+B1 K11+B2 K6+B1 K3+B2 B1 B2 B1 B2 M25 17.6 11506260
N PLAN 10x/0.25 0 P - K2+B1 K11+B1 K3+B1 K11+B2 K6+B1 K3+B2 B1 B2 B1 B2 M25 17.6 11556070
N PLAN EPI 10x/0.25 0 5) - K2+B1 K11+B1 K3+B1 K11+B2 K6+B1 K3+B2 B1 B2 B1 B2 M25 17.6 11566068
N PLAN EPI 10x/0.25 0 BD - K2+B1 K11+B1 K3+B1 K11+B2 K6+B1 K3+B2 B1 B2 B1 B2 M32 16.2 11566061
N PLAN EPI XLR 10x/0.25 Oil Pol - - - - - - - M25 0.4 11556513
FL PLAN 10x/0.25 0 0 0 K2+B1 K11+ B1 K3+B1 K11+B2 K6+B1 K3+B2 B1 B2 B1 B2 M25 17.6 11506306
FL PLAN 10x/0.25 0 PH1/ - K2+B1 K11+ B1 K3+B1 K11+B2 K6+B1 K3+B2 B1 B2 B1 B2 M25 17.6 11506307
HC PL FLUOTAR 10x/0.30 0 0 - K2+D1 K11 K3(K11) K6(K3) D1(D) D1/D M25 11.0 11506505
HC PL FLUOTAR 10x/0.30 0 PH1/ - K2+D1 K11 K3(K11) K6(K3) D1(D) - M25 11.0 11506507
HC PL FLUOTAR 10x/0.30 0 P - K2+D1 K11 K3(K11) K6(K3) D1(D) D1/D M25 11.0 11556503
HC PL FLUOTAR 10x/0.30 0 BD - K2+D1 - - - - D1/D M32 11.0 11566503
PL S-APO 10x/0.30 0 0 - K2+D1 K11 K3(K11) K6(K3) D1(D) D1/D M25 11.1 11506289
HCX APO L U-V-I 12) 10x/0.30 W 2) - K2+D1 - - - - - M25 3.6 11506142
HC PL APO 10x/0.40 0 / 0.17 K2+A K11 K3 K6 A - M25 2.2 11506284
HC PL APO CS 10x/0.40 0 / 14) 0.17 K2+A K11 K3 K6 A - M25 2.2 11506285
HC PLAN APO 10x/0.40 0 PH1/ 0.17 K2+A K11 K3 K6 A - M25 2.2 11506286
HC PL APO CS 10x/0.40 IMM 14) - K2+A K11 K3 K6 A - M25 0.36 11506293
HI PLAN EPI 20x/0.40 0 0 0 - - - - - - M25 1.15 11566070
HI PLAN 20x/0.40 0 / 0.17 - - - - - - M25 0.9 11506276
HI PLAN 20x/0.40 0 PH1/ 0.17 - - - - - - M25 0.9 11506278
HI PLAN 20x/0.40 0 P 0.17 - - - - - - M25 0.9 11556071
HI PLAN I 20x/0.30 0 13) 0-2 - - - - - - M25 3.7-2.4 11506264
HI PLAN I 20x/0.30 0 PH1/ 13) 0-2 - - - - - - M25 3.7-2.4 11506272
N PLAN 20x/0.40 0 / 13) 0.17 K2+D K3(K11) K6(K3) K8(K6) D1(D) - M25 0.39 11506096
N PLAN 20x/0.40 0 PH1/ 13) 0.17 K2+D K3(K11) K6(K3) K8(K6) D1(D) - M25 0.39 11506098
N PLAN EPI 20x/0.40 0 0 O - - - - - D1/D M25 1.15 11566066
N PLAN EPI 20x/0.40 0 BD O - - - - - D1/D 5) M32 1.15 11566067
N PLAN 20x/0.40 0 P O - - - - - D1/D M25 1.15 11556072
N PLAN L 20x/0.35 0 / 0-2 K2+C (K3+C1) K11+C (K3+C1) K3+C (K6+C1) K6+C (K8+C1) C(C1) 0 M25 6.9 11506247
N PLAN L 20x/0.35 0 PH1 0-2 K2+C (K3+C1) K11+C (K3+C1) K3+C (K6+C1) K6+C (K8+C1) C(C1) 0 M25 6.9 11506248
N PLAN L 20x/0.40 CORR LMC 0-2 - - - - - - M25 3.2-1.9 11506204
N PLAN L 20x/0.40 0 0 0 - - - - - C M25 10.8 11566049
N PLAN L 20x/0.40 0 BD 0 - - - - - C M32 10.8 11566051
N PLAN EPI 20x/0.40 Oil XLR 0 K2+C (K3+C1) K11(K3) K3(K6) K8 C(C1) C/C1 M25 0.23 11556076
FL PLAN 20x/0.40 0 / 0.17 K2+D K3(K11) K6(K3) K8(K6) D1(D) - M25 0.40 11506308
FL PLAN 20x/0.40 0 PH1/ 0.17 K2+D K3(K11) K6(K3) K8(K6) D1(D) - M25 0.40 11506309
HCX PL FLUOTAR 20x/0.50 0 / 0.17 K2+D (K3+D1) K3(K11) K6(K3) K8(K6) D1(D) - M25 1.15 11506503
HCX PL FLUOTAR 20x/0.50 0 PH2/ 0.17 K2+D (K3+D1) K3(K11) K6(K3) K8(K6) D1(D) - M25 1.15 11506506
HCX PL FLUOTAR 20x/0.50 0 P 0 K2+D (K3+D1) K3(K11) K6(K3) K8(K6) D1(D) - M25 1.15 11556068
HC PL FLUOTAR 20x/0.50 0 P 0.17 K2+D (K3+D1) K3(K11) K6(K3) K8(K6) D1(D) - M25 1.15 11556501
HC PL FLUOTAR 20x/0.50 0 0 O K2+D (K3+D1) - - - - D1/D M25 1.27 11566500
HCX PL FLUOTAR 20x/0.50 0 BD O K2+D (K3+D1) - - - - D1/D M32 1.27 11566507
HCX PL FLUOTAR L 20x/0.40 CORR / 0-2 K2+C (K3+C1) K11+C (K3+C1) K3+C (K6+C1) K6+C (K8+C1) C(C1) 0 M25 6.9 11506242
HCX PL FLUOTAR L 20x/0.40 CORR PH1 / 0-2 K2+C (K3+C1) K11+C (K3+C1) K3+C (K6+C1) K6+C (K8+C1) C(C1) 0 M25 6.9 11506243
PL FLUOTAR L 20x/0.40 0 BD O - - - - - C M32 10.7 11766001
PL S-APO 20x/0.50 0 / 0.17 K2+D (K3+D1) K3(K11) K6(K3) K8(K6) D1(D) - M25 1.15 11506290
HCX APO L U-V-I 12) 20x/0.50 W 2) - K3+D1 - - - - - M25 3.5 11506147
HCX APO L 20x/1.00 W 2) 0 K7/H (K17/H) M32 2.0 11507701
HC PL APO CS 20x/0.70 0 / 14) 0.17 K2+C K11 K3 K6 C - M25 0.59 11506513
HC PLAN APO 20x/0.70 0 / 0.17 K2+C K11 K3 K6 C - M25 0.59 11506166
HC PLAN APO 20x/0.70 0 PH2/ 0.17 K2+C K11 K3 K6 C - M25 0.59 11506170
HC PL APO 20x/0.70 IMM/CORR 7) / 14) Lbd. Bl 15) - K2+C K11 K3 K6 C - M25 0.26 with W and 0.17 11506191
0.26 with
HC PL APO CS 20x/0.70 IMM/CORR 7) 14) - K2+C K11 K3 K6 C - M25 W and 11506178
0.17
HI PLAN 40x/0.65 0 0 0.17 - - - - - - M25 0.36 11506236
HI PLAN 40x/0.65 0 PH2/ 0.17 - - - - - - M25 0.36 11506240
HI PLAN 40x/0.65 0 POL 0.17 - - - - - - M25 0.36 11556065
C PLAN L 40x/0.50 0 0 1.1 - - - - - - M25 2.0 11506265
HI PLAN I 40x/0.50 0 0 1.1 - - - - - - M25 2.0 11506265
HI PLAN I 40x/0.50 0 PH2/ 1.1 - - - - - - M25 2.0 11506273
N PLAN 40x/0.65 0 / 13) 0.17 K3+D (K6+D1) K3(K6) K6(K8) K8 D(D1) - M25 0.36 11506097
N PLAN 40x/0.65 0 PH2/ 13) 0.17 K3+D (K6+D1) K3(K6) K6(K8) K8 D(D1) - M25 0.36 11506099
N PLAN L 40x/0.55 CORR / 13) 0-2 K3+C K3 K6 K8 C C M25 3.3-1.9 11506218
N PLAN L 40x/0.55 CORR PH2/ 13) 0-2 K3+C K3 K6 K8 C - M25 3.3-1.9 11506219
N Plan EPI 40x/0.75 0 BD 0 0 K3(K6) 0 0 D(D1) 0 M32 0.37 11566078
N Plan EPI 40x/0.75 0 0 0 0 K3(K6) 0 0 D(D1) 0 M25 0.37 11566079
N Plan 40x/0.75 0 0 0 0 K3(K6) 0 0 D(D1) 0 M25 0.38 11506314
FL PLAN 40x/0.65 0 / 0.17 K3+D (K6+D1) K3(K6) K6(K8) K8 D(D1) - M25 0.37 11506310
FL PLAN 40x/0.65 0 PH2/ 0.17 K3+D (K6+D1) K3(K6) K6(K8) K8 D(D1) - M25 0.37 11506311
HCX PL FL L 40x/0.60 CORR / 13) 0-2 K3+C K3(K6) K6(K8) K8 C(C1) C M25 3.3-1.9 11506201
HCX PL FL L 40x/0.60 CORR XT/LMD 13) 0-2 K3+C K3(K6) K6(K8) K8 C C M25 3.3-1.9 11506208
HCX PL FL L 40x/0.60 CORR PH2/ 13) 0-2 K3+C K3(K6) K6(K8) K8 C - M25 3.3-1.9 11506203
HCX PL FL L 40x/0.60 CORR PH2/XT/LM D 13) 0-2 K3+C K3(K6) K6(K8) K8 C - M25 3.3-1.9 11506209
HCX PL FL L 40x/0.60 CORR LMC 0-2 - - - - - - M25 3.3-1.9 11506205
HCX PL FLUOTAR 40x/0.75 0 / 0.17 K3+D (K6+D1) K3(K6) K6(K8) K8 D(D1) - M25 0.40 11506144
HCX PL FLUOTAR 40x/0.75 0 PH2/ 0.17 K3+D (K6+D1) K3(K6) K6(K8) K8 D(D1) - M25 0.40 11506145
HCX PL FLUOTAR 40x/0.75 0 P/ 0.17 K3+D (K6+D1) K3(K6) K6(K8) K8 D(D1) - M25 0.40 11556052
PL S-APO 40x/0.75 0 / 0.17 K3+D (K6+D1) K3(K6) K6(K8) K8 D(D1) - M25 0.28 11506291
HCX APO L U-V-I 12) 40x/0.80 W 2) O K6+D1 - - - - - M25 3.3 11506155
HCX PL APO U-V-I 12) 40x/0.75 0 0 0.17 K3+D (K6+D1) K3(K6) K6(K8) K8 D(D1) - M25 0.28 11506173
HCX PL APO 40x/0.85 CORR / 0.11-0.23 K3+C K3 K6 K8 C - M25 0.24 11506294
HCX PL APO 40x/0.75 0 PH2/ 0.17 K3+D (K6+D1) K3(K6) K6(K8) K8 D(D1) - M25 0.28 11506296
HCX PL APO CS 40x/0.85 CORR / 14) 0.11-0.23 K3+C K3 K6 K8 C - M25 0.24 11506295
HCX PL APO 40x/1.25-0.75 OIL / 0.17 K3+D or K6+D1 K3+D or K6+D1 K6+D or K8+D1 K8 D - M25 0.1 11506250
HCX PL APO CS 40x/1.25-0.75 OIL / 14) 0.17 K3+D or K6+D1 K3+D or K6+D1 K6+D or K8+D1 K8 D - M25 0.1 11506251
HCX PL APO CS 40x/1.25 OIL PH3 / 14) 0.17 K3+D or K6+D1 K3+D or K6+D1 K6+D or K8+D1 K8 D - M25 0.1 11506252
HCX PL APO 40x/1.25-0.75 OIL / 14) Lbd. Bl 15) 0.17 K3+D or K6+D1 K3+D or K6+D1 K6+D or K8+D1 K8 D - M25 0.1 11506253
N PLAN EPI 50x/0.75 0 0 0 - - - - - D(D1) 5) M25 0.37 11566072
N PLAN EPI 50x/0.75 0 P 0 - - - - - D(D1) M25 0.37 11556073
N PLAN EPI 50x/0.75 0 BD 0 - - - - - D(D1) 5) M32 0.37 11566074
N PLAN 50x/0.85 OIL / - - - - - - - M25 0.13 11556023
N PLAN 50x/0.90 OIL / - - - - - - - M25 0.14 11506085
N PLAN L 50x/0.50 0 BD 0 - - - - - C, C1 M32 8.2 11566038
N PLAN L 50x/0.50 0 0 0 - - - - - C M25 8.2 11566036
N PLAN H 50x/0.50 0 0 1.8 Q - - - - - - M25 7.1 11566040
HC PL FLUOTAR 50x/0.80 0 0 0 - - - - - D(D1) M25 0.5 11566501
HC PL FLUOTAR 50x/0.80 0 BD 0 - - - - - D(D1) M32 0.5 11566504
HC PL FLUOTAR 50x/0.80 0 0 0 - - - - - D(D1) M25 0.5 11556069
PL FLUOTAR L 50x/0.55 0 0 0 - - - - - C M25 8.0 11566062
PL FLUOTAR L 50x/0.55 0 BD 0 - - - - - C M32 8.0 11766000
PL APO 50x/0.90 0 0 0 - - - - - C, C1, C2 M25 0.28 11566064
HCX PL APO 50x/0.85 0 BD 0 - - - - - C, C1, C2 M32 0.34 11766013
HI PLAN 63x/0.75 0 / 0.17 - - - - - - M25 0.31 11506237
HI PLAN 63x/0.75 0 P/ 0.17 - - - - - - M25 0.31 11556066
HCX PL FLUOTAR L 63x/0.70 CORR 13) 0.1-1.3 K5+C or K15+C 11) K5 K7 - C C M25 2.6-1.8 11506216
HCX PL FLUOTAR L 63x/0.70 CORR PH2/ 13) 0.1-1.3 K5+C or K15+C 11) K5 K7 - C - M25 2.6-1.8 11506217
HCX PL FLUOTAR L 63x/0.70 CORR XT/LMD 13) 0.1-1.3 K5+C or K15+C 11) K5 K7 - C - M25 2.6-1.8 11506222
N PLAN 63x/0.80 0 / 0.17 K5+D K5 K7 - D - M25 0.26 11506184
N PLAN 63x/0.80 0 P 0.17 K5+D K5 K7 - D - M25 0.26 11556056
HCX APO L U-V-I 12) 63x/0.90 W 2) 0 K7+D1 - - - - - M25 2.2 11506148
HCX PL FLUOTAR 63x/0.90 CORR / 0.11-0.23 K7+D1 K7 K10 - D1 - M25 0.22 11506223
HCX PL FLUOTAR 63x/1.25 OIL / 0.17 K4+E K4 K10 - E - M25 0.19 11506185
HCX PL FLUOTAR 63x/1.25 OIL PH3/ 0.17 K4+E K4 K10 - E - M25 0.19 11506186
PL S-APO 63x/1.30 OIL / 0.17 K4+E K4 K10 - E - M25 0.19 11506292
HCX PL APO 63x/1.30 GLYC 37°C / 0.14-0.18 K7+D1 or K7+D1pifoc 16) K7 or K7+D1pif oc 16) K10+D1 or K10+D1p ifoc 16) - D(D1) - M25 0.28 11506193
HCX PL APO CS 63x/1.30 GLYC 21°C / 14) 0.14-0.18 K7+D1 or K7+D1pifoc 16) K7 or K7+D1pif oc 16) K10+D1 or K10+D1p ifoc 16) - D(D1) - M25 0.28 11506194
HCX PL APO 63x/1.40-0.60 OIL / 0.17 K4+E or K9+E 11) K4 K10 - E - M25 0.10 11506187
HCX PL APO CS 63x/1.40-0.60 OIL / 14) 0.17 K4+E or K9+E 11) K4 K10 - E - M25 0.10 11506188
HCX PL APO 63x/1.40-0.60 OIL / 14) Lbd. Bl 15) 0.17 K4+E or K9+E 11) K4 K10 - E - M25 0.10 11506192
HCX PL APO CS 63x/1.20 W CORR 8) / 14) 0 K5+D or K15+D 11) K5 K7 - D - M25 0.22 11506281
HCX PL APO CS 63x/1.40 OIL PH3/ 0.17 K4+E or K9+E 11) K4 K10 - E - M25 0.1 11506206
HCX PL APO CS 63x/1.20 W CORR 8) / 14) 0.14-0.18 K5+D or K15+D 11) K5 K7 - D - M25 0.22 11506279
HI PLAN 100x/1.25 OIL / 0.17 - - - - - - M25 0.10 11506238
HI PLAN 100x/1.25 OIL PH3/ 0.17 - - - - - - M25 0.10 11506241
N PLAN L 100x/0.75 0 0 0 K4+B2 - - - - B1(B2) M25 3.5 11566047
N PLAN L 100x/0.75 0 BD 0 K4+B2 - - - - B1(B2) M32 3.5 11566048
N PLAN EPI 100x/0.85 0 0 0 - - - - - D(D1) M25 0.33 11566073
N PLAN EPI 100x/0.85 0 BD 0 - - - - - D(D1) M32 0.33 11566075
N PLAN EPI 100x/0.85 0 P 0 - - - - - D(D1) M25 0.33 11556074
N PLAN 100x/1.25 OIL / 13) - K4+D or K9+D 11) K4 or K12 11) K10 - D - M25 0.12 11506158
N PLAN 100x/1.25-0.60 OIL / 13) 0.17 K4+D or K9+D 11) K4 or K12 11) K10 - D - M25 0.12 11506207
N PLAN 100x/1.25 OIL PH3/ 13) - K4+D or K9+D 11) K4 or K12 11) K10 - D - M25 0.12 11506159
N PLAN 100x/1.25 OIL P - K4+D or K9+D 11) K4 or K12 11) K10 - D D(D1) M25 0.12 11556053
HCX FL PLAN 100x/1.25 OIL / 13) 0.17 K4+D or K9+D 11) K4 or K12 11) K10 - D - M25 0.13 11506312
HCX FL PLAN 100x/1.25 OIL PH3/ 13) - K4+D or K9+D 11) K4 or K12 11) K10 - D - M25 0.13 11506313
HC PL FLUOTAR 100x/0.90 0 0 0 K4+D - - - - D(D1) M25 0.27 11566057
HC PL FLUOTAR 100x/0.90 0 BD 0 K4+D - - - - D(D1) M32 0.30 11566055
PL FLUOTAR 100x/0.90 0 P 0 K4+D or K10+D1 K4 (K10) K10 - D D(D1) M25 0,27 11556063
PL FLUOTAR L 100x/0.75 0 0 0 - - - - - - M25 4.7 11566063
HCX PL FLUOTAR 100x/1.30 OIL 0 0.17 K4+D K4 or K12 11) K10 - D D(D1) M25 0.13 11506195
HCX PL FLUOTAR 100x/1.30 OIL 0 0 K4+D or K9+D 11) - - - - D(D1) M25 0.22 11506199
HCX PL FLUOTAR 100x/1.30-0.60 OIL 0 0.17 K4+D or K9+D 11) K4 or K12 11) K10 - D D(D1) M25 0.13 11506196
HCX PL FLUOTAR 100x/1.30 OIL PH3/ 0.17 K4+D or K9+D 11) K4 or K12 11) K10 - D D(D1) M25 0.13 11506197
HCX APO U-V-I 12) 100x/1.30 OIL 0 0.17 K4+D or K9+D 11) K4 or K12 11) K10 - D D(D1) M25 0.12 11506156
PL APO 100x/0.95 0 0 0 K4+C - - - - C RMS 0.16 11567023
PL APO 100x/0.95 0 0 0 K4+C - - - - C M25 0.16 11566065
PL APO 100x/0.90 OIL BD 0 K4+C - - - - C M32 0.26 11566014
HCX PL APO CS 100x/1.40-0.70 OIL / 14) 0.17 K4+D or K9+D 11) K4 or K12 11) K10 - D - M25 0.09 11506210
HCX PL APO CS 100x/1.40 OIL PH3/ 0.17 K4+D or K9+D 11) K4 or K12 11) K10 - D - M25 0.09 11506211
HCX PL APO 100x/1.40-0.70 OIL / 0.17 K4+D (K10+D1)or K9+D 11) K4 or K12 11) K10 - D - M25 0.09 11506220
HCX PL APO 100/1.46 OIL / 0.14-0.22 K4+D or K10+D1 K4+D or K10+D1 K10 - D - M25 0.09 11506249
HCX PL APO CS 100/1.46 OIL / 14) 0.14-0.22 K4+D or K10+D1 K4+D or K10+D1 K10 - D - M25 0.09 11506274
HCX PL FLUOTAR 150x/0.90 0 LMD 0 K8+C K8 K10 - C C M25 0.25 11506214
PL APO 150x/0.95 0 0 0 - - - - - C RMS 0.20 11567042
PL APO 150x/0.90 0 BD 0 - - - - - C M32 0.25 11566015

物鏡表對照說明 

Tube length oo, reference focal length of tube lens f B = 200 mm, parfocalizing distance 45 mm

Immersions:

OIL = DIN/ISO standard immersion oil 

IMM = either water, glycerine or oil W = water

Techniques:

Suitable for transmitted light brightfield, transmitted light darkfield, fluorescence and polarization contrast is not explicitly mentioned. C PLAN achromats are only recommended for fluorescence under certain conditions.

BD       = for brightfiled/incident light darkfield 

PH       = phase contrast objective 

RC       = reflection contrast objective 

L         = long free working distanc 

P,POL  = low strain, for quantitative polarization 

/          = not for incident light, except fluorescence 

LMC    = Modulation contrast objective (only with DM IRB)

IC prisms for interference contrast

Condenser prisms: 

K1a only DM R with condensers UCR/UCPR, condenser head swung out 

K2-K5+K11 only with condenser top 0.90 S1 or P 0.90 S1

(upright) 

K9,K12,K15 only with condenser top P 1.40 OIL S1 

Objective prisms: A-E Prisms B2 / D wide shearing = higher contrast

B1 / D1 narrow shearing = higher resolution

Coverglass specification:

-         for use with and without coverglass 

O        for use without a coverglass

0.17    for use with a 0.17 mm coverglass (DIN/ISO) 

1.8Q   for use with 1.8 mm quartz glass window on heating stages 

0-2     for use with coverglasses of 0 - 2 mm thickness

Lowest objective magnifications:

Depending on microscope/condenser type:

DM 1000/2000 :

UCL/UCLP 2.5x fov 25 with 2.5x auxiliary lens 

CL/PH 2.5x with diffusing disc 

Condenser ach. apl. 0.9 (P): 1.25x with diffusion filter

DM LP/LM

UCA / UCLP 1.6x / fov 25

DM2500

Condenser ach. apl. 0.9 (P): 1.25x UCA / UCAP 1.25x/fov 25 CL/PL 10x /fov 25

1) With quartz plate mounted in front for enhanced contrast (crossed polarizers required)

2) Inert front part with minimum electric and thermal conductivity, chemically neutral ceramic

3) Immersion cap for oil, water etc. available (11556045)

4) Push-on cap CG 0.4 (11506071) for coverglass 0.25 - 0.55 mm

5) For incident light objects with weak contrast, N PLAN POL or HC PL FLUOTAR / PL APO objectives can be used instead

6) K1a-condenser-prisms only with UCR condenser and DM R microscope, condenser top swung out!

7) Correction for adaption with / without coverglass / with water, glycerine or immersion oil

8) Correction for adaption to coverglass thickness 0.14-0.18 mm / temperature 15 - 37°C and NaCl 0 - 3 %

9) Correction for temperature 15 - 37°C and NaCl 0 - 3 %

11) with Condensertop P 1.40 OIL S1

12) U-V-I: UV-Visible-IR

13) useful and recommended for Integrated Leica Modulation Contrast (IMC)

14) optimized for Confocal Scanning

15) Lbd. BL (Lambda blue): enhanced approchromatic correction, GFP optimized

16) with Piezo-focusing (DM MDW)

17) reommended for Leica DM4000/DM5000/DM6000

Adapters are required for objective threads that do not fit the nosepiece: 

M25/RMS = 11506028 

M32/M25 = 11561003 

M32/RMS = 11562281

　
　
請參考相關 DMI 6000 B 其他訊息
Leica DMI 6000 B 倒立顯微鏡 詳細介紹 ( 組件與組配介紹 )
Leica DMI 6000 B 物鏡表
Leica DMI 6000 B 螢光濾鏡表
Leica DMI 6000 B 規格
Leica DMI 6000 B 產品型錄 ( PDF, 英文版, 5.04 MB )
Leica DMI 6000 B 組件說明 ( PDF, 英文版, 2.43 MB )
  請參考其他機型  Leica DM IL 

普及型, 機械式, 倒立顯微鏡

 Leica DMI 3000 B 

研究級, 機械式, 倒立顯微鏡 

 Leica DMI 4000 B 

研究級, 電控式, 倒立顯微鏡

回  首頁 

 至 Leica DMI 6000 B 首頁
美嘉儀器股份有限公司 Major Instruments Co., Ltd.
台北總公司 : TEL : 02-2808-1452  FAX : 02-2808-2354  維修中心