徠卡顯微鏡系統
雷射掃描共軛焦顯微鏡
半導體及工業用顯微鏡
顯微數位影像系統
細胞基因影像分析系統
其它光電微機電系統
其它生醫研究儀器
維修與技術支援服務
聯絡與留言
美國 LUDL 公司, 載物台 有手動機械式, 電控式, 壓電控制 Piezo 載物檯, 並有自動玻片送片匣, 調焦控制, 可被 MetaMorph , IPP 所驅動 .......
96S108 stage ( 倒立顯微鏡適用 ) 　 96S106 stage ( 倒立顯微鏡適用 )
　
Descripton Encoder Catalog Number Travel (mm) Resolution (µm) Repeatability (µm) Accuracy (µm) Weight (kg)
Flat-top Inverted Stage None 96S106 100 x 120 0.2 0.75 6 4.3
Flat-top Inverted Stage Linear 96S106-LE 100 x 120 0.1 0.25 3 4.3
Flat-top Inverted Stage Rotary 96S106-RE 100x120 0.2 0.6 6 4.3
Standard Inverted Stage None 96S108 100 x 120 0.05 0.75 6 3.7
Standard Inverted Stage Linear 96S108-LE 100 x 75 0.1 0.25 3 3.7
Standard Inverted Stage Rotary 96S108-RE 100 x 120 0.2 0.6 6 3.7
LUDL 倒力顯微鏡用電控載物台型錄下載
多功能的控制模組化控制器 依照您的硬體及應用, 模組化組裝的選配控制器
MAC 6000 controller MAC 6000 with optional module
LUDL MAC 6000 型錄下載 　

73006054 Dual Microstepping Motor Driver

The LEP Dual Microstepping Motor Driver is designed to work with precision automation devices. The drive is capable of very high microstep resolution; up to 40,000 microsteps per revolution with a standard 1.8 degree stepper motor. The drive module can source up to 2 amps per phase at 24 volts. The motor current is precision regulated by the microprocessor. Designed expressly for precision instrumentation, the unique DC linear power regulation of the MAC 6000 Microstepping Motor Driver provides the highest performance and precision without excessive motor heating or EMI radiation that can sometimes be a problem with conventional microstepping drives. The LEP Dual Microstepping Motor Driver has inputs for end limits, pre-limits (deceleration), and index signals. In addition, the motor driver supports manual control with joystick (analog) and/or trackball (digital) inputs. For integration with high throughput systems, there are digital sync inputs and outputs to link motor position to signal acquisition.
　

73006042 Interface Module

The MAC 6000 interface module is the brain of the MAC 6000 system. This module processes all of the commands from host systems, supervises all of the modules on the MAC 6000 ‘stack’ and executes scripts for autonomous control. The MAC 6000 interface provides dual RS-232 ports, USB and Ethernet connectivity … simultaneously. Each interface option functions as an independent communications port enabling configuration flexibility and the possibility of more than one host connection. The MAC 6000 command set maintains compatibility with previous MAC 5000 system. A MAC 6000 specific command set provides state of the art communication with streamlined commands and programmable event based messaging. For example, utilizing the event based messaging, the MAC 6000 can be configured to send a message to the host computer when a device has begun it move, stopped or changed position. This type of messaging eliminates the common, inefficient polling loops that are required with most systems. Your microscope is a web server! The MAC 6000 has built-in web server capability. Primarily provided to make system configuration easier, the web server function can be used for remote control and monitoring of the system or to provide a simple, universal local display of system status. The possibilities are endless.
　

73006081 Dual DC Servo Filter Wheel Control Module

LEP manufactures a wide array of filter wheels for microscopes. The Dual DC Servo Filter Wheel Control Module provides the control for these wheels. As each wheel has an embedded memory device that identifies all of the characteristics of that particular wheel the control module then adjusts operating parameters to match the wheel. Since each parameter set is tuned for the wheel and application, the performance is assured. Sophisticated interface I/O capability provides gating signals for either triggering filter position or triggering external devices. For example, with proper interfacing, a system can be configured to position a filter, output a signal to a camera which in turn signals back to the controller when the frame is complete so the next filter can be positioned.
　

73006055 Dual DC Servo Motor Driver

The Dual DC Servo Motor Driver is capable of driving two independent DC servo motors. For applications that require high speed and high power DC servo motors are often used. Designed for precision instrumentation, with high resolution encoders, the DC Servo Motor Driver features fully programmable servo parameters along with  command compatibility with the LEP Dual Microstepping Motor Driver. This module has inputs for end limits, pre-limits (deceleration), and index signals. In addition, the motor driver supports manual control with joystick (analog) and/or trackball (digital) inputs. For integration with high throughput systems, there are digital sync inputs and outputs to link motor position to signal acquisition.
　

73006056 Focus Control Module

Focus motor control requires more than a simple motor drive. The Focus control module is a single axis version of the 73006054 Dual Microstep Motor Drive with additional  capability such as electronic motor disengagement, high resolution encoder feedback inputs and additional manual control features. Like the 73006054 Drive, the Focus Control Module is designed for optimum performance with the LEP focus motors optionally utilizing linear encoder feedback. The high stability and low EMI make this device especially suited to the laboratory environment where sensitive electronic instrumentation can be affected by some types of motion control.    
　

73006063 Piezo Drive Module

The MAC 6000 solution for Piezo transducer control is the 73006063 Piezo Drive Module. This module provides high resolution, high performance control for the Piezo focus devices. This module is very flexible and achieves the high speed with resolution that is required for demanding, cutting-edge microscopy techniques.  Featuring very flexible and powerful control modes, the Piezo Drive module can be controlled with standard LEP MAC 6000 motion commands, analog control signals and digital control signals. Manual control is also available for interactive operation.

73006060 General Purpose I/O Module

The Digital/Analog Interface module provides discrete inputs and outputs for sensing and control. The ability to  read switches and sense analog levels can be very useful in applications where sensing of switches, controlling valves, detecting temperature levels is important.  There are endless applications for this module!

　

73006080 Dual Step Motor Filter Wheel Control Module

The Dual Stepper Motor Filter Changer supports two filter wheels or one dual filter wheel and up to three shutters. Manual filter and shutter control is provided from the convenient front panel switches. Similar to the 73006081 Dual DC Servo Filter Wheel Control Module, this module recognizes the filter wheel and set parameters accordingly. While most LEP stepper motor filter wheels are no longer available as standard catalog items, this module will support most legacy wheels and proprietary designs.
　

73006068 Multi Shutter Control Module

The MAC 6000 Multi Shutter Control Module controls up to 4 independent shutters. The advanced shutter control utilizes precision timing of the shutter motion to minimize vibration without compromising performance. The controller can be fully integrated with external bi-directional synchronization inputs and outputs.
The Multi Shutter Control Module is fully command compatible with shutter commands used in both the DC servo and stepper motor filter control modules.
　

　
　
 電控調焦 ( Piezo Z-Stage ) 　 電控調焦 ( Motor Z-drive )
　
Nano Positioning – Piezo Focus

rapid, precise focus control. The LEP Piezo Z-stage insert addresses these requirementsand provides the highest performance in a convenient form-factor that is easily adaptedto most inverted microscope stages.

The insert provides a stable platform for large and small specimens including industrystandard multi-well plates, 1”x3” and 2”x3” glass slides as well as culture dishes. Themany different specialized applications as well as general microscopy. With either 200 or 500 microns of travel the Piezo Z-stage can provide high performance focus control for a wide range of applications.

The Piezo Z-stage integrates with the MAC 5000 automation controller system.

Additional control boxes are not necessary. A dedicated MAC 5000 module provides full 16 bit resolution, digital position feedback and sophisticated electronic triggering options. An additional analog control interface is also provided for high speed synchronized operation. Digital control of the SGS position feedback eliminates manual offset adjustments for long-term accuracy.

Software bridge commands for the Piezo Z-stage are compatible with standardMAC 5000 motor commands. Most software developed for the standard motorized focus,will integrate transparently

　

 　 Standard Motor Drive 73000365
The standard automated focus is a motor coupled to the fine focus of the microscope. The LEP precision stepper motor drive can provide very high resolution: up to 2.5 nanometers. An optional linear encoder can be integrated with the focus motor. The encoder is fixtured to the microscope body so that it provides real-time measurement of the stage height in relation to the optics. The result is a stable, highly accurate performance that can dynamically compensate for focus drift and drive errors.
Manual control of the motorized focus is also very important. The 73000365 digipot control provides positive feedback similar to a conventional microscope but with higher accuracy and less uncertainty.
　
LUDL Piezo Z-stage & Focus control 型錄下載 　 　

訂購需知 :

Part Number Description   ( add-on for existing MAC 5000 system )

  • 99A600 Piezo Z-stage insert for LEP Inverted stage with 200 micron travel

  • 99A601 Piezo Z-stage insert for LEP Inverted stage with 500 micron travel

  • 73005063 MAC 5000 Piezo control module

example: 200 micron travel stand-alone system

  • 99A600 Piezo Z-stage insert for LEP inverted stage

  • 995001 MAC 5000 base system, includes power supply and interface

  • 73005063 MAC 5000 Piezo control module

　
正立顯微鏡 電控載物檯

The BioPrecision2 positioning　mechanism features a stepper motor driven　precision recirculating ball leadscrew providing　a minimum step resolution of 25nm. Speed performance is not compromised with high resolution; the maximum　speed is 30mm/sec.
　LUDL BioPrecision2 Upright Microscope Stage 產品型錄下載
 自動玻片送片匣
  • The LEP Slide Handler System is designed to be simple, flexible, affordable and reliable. The complete system is tightly integrated achieving a complete slide handling solution with full features without complexity.
     Universal compatibility
  • Compact footprint
  • 50 slide capacity
  • Patented design
  • High reliability
  • Table-top design
  • Expandable
  • CE/UL Compliant

　
架構高通量的玻片掃描及影像擷取
半導體工業應用的顯微鏡載物檯，　從 8x8", 12x12" 到 16x16", 20x20". 型式齊全.
To meet the ever increasing demands of the semiconductor industry, LEP has a full line of high accuracy, high performance stages. Designed to eliminate compromise, these stages offer the best performance available in a low profile microscope stage. Attention to detail in design, manufacturing and components are keys to the quality of the final product. Each stage uses a highly refined, evolved design that is proven with every stage. All critical components are machined on state of the art machining centers in LEP’s own machine shop for the highest level of control. All components are inspected and measured before they can be used. Very strict quality standards ensure only perfect parts are used. Precision and repeatability is assured by the use of high resolution rotary encoders mounted to the leadscrew shaft. Zero backlash recirculating ball leadscrews ensure high accuracy and long life. Precision ground crossed roller bearing guide bearings enhance the performance of this stage.
  半導體/電子材料工業應用, 顯微鏡載物檯 型錄下載
Description Catalog Number Travel (mm) Encoder Resolution (µm) Repeatability (µm) Accuracy
8"x8" Semiconductor Stage, Compact Envelope 99S103-6 200x200 None 0.4 2.0 n/a
8"x8" Semiconductor Stage, Compact Envelope with Linear Encoder 99S103-6-LE 203x203 Linear 0.1 0.25 4µm/200mm
8"x8" Semiconductor Stage 99S103 203x203 none 0.4 2.0 n/a
8"x8" Semiconductor Stage with Linear Encoder 99S103-LE 203x203 linear 0.1 0.25 4µm/200mm
12"x12" Semiconductor Stage 99S105 305x305 none 0.4 4.0 n/a
12"x12" Semiconductor Stage with Linear Encoders 99S105-LE 305x305 linear 0.1 1.0 6µm/300mm
8"x8" Semiconductor Stage, High Accuracy 99S023 203x203 rotary 0.1 2.0 8µm/200mm
8"x8" Semiconductor Stage, High Accuracy with Grid Encoder 99S022 203x203 grid 0.1 0.2 2µm/200mm
12"x12" Semiconductor Stage, High Accuracy 99S025 305x305 rotary 0.1 2.0 12µm/300mm
12"x12" Semiconductor Stage, High Accuracy with Grid Encoder 99S024 305x305 grid 0.2 0.4 3µm/300mm
16"x16" Large Format Stage 99S016 405x405 rotary 0.4 6.0 n/a
20"x20" Large Format Stage 99S020 508x508 rotary 0.4 8.0 n/a
相關電控載物檯及調焦控制...............
美嘉儀器股份有限公司 Major Instruments Co., Ltd.
台北總公司 : TEL : 02-2808-1452  FAX : 02-2808-2354  維修中心 : 02-2808-2353   高雄辦事處 - TEL : (07) 725-8177  FAX : (07) 725-8204

E-mail : major@major.com.tw    http://www.major.com.tw